电感耦合等离子体原子发射光谱法测定钛合金中钨、铌、钽

采用电感耦合等离子体原子发射光谱法（ICP-AES）法测定钛合金中W,Nb,Ta元素的含量。样品采用盐酸、氢氟酸和硝酸溶解,并对仪器工作参数和试验条件进行了优化试验,确定了仪器最佳工作条件,考察了钛合金基体和共存元素对待测元素的影响,确定了各待测元素谱线为W207．911nm,Nb309．418nm,Ta240．063nm。选定的待测元素分析线不受合金基体和共存元素的干扰,通过基体匹配消除基体的影响。加标回收率在98％104％之间,测定结果的相对标准偏差为0．3％～2．4％（n=8）,方法的检出限为0．003-0．013μg／mL。进行了标准物质对照试验,试验结果与标准值相符。     

离子色谱法测定甲醇和噻吩中硫、氯含量

建立了测定工业用甲醇和噻吩中硫、氯含量的离子色谱检测方法。样品经(700±25)℃灼烧后,残留物用蒸馏水洗涤,利用离子色谱仪进行分析。甲醇和噻吩中硫、氯检测结果的相对标准偏差为1.04%~1.26%,加标回收率为99.2%~101.2%。该方法操作简单,精密度和准确度高,可用于大部分可燃性有机化合物中硫、氯含量的检测。     

Amperometric detection of nitrite based on Dawson-type vanodotungstophosphate and carbon nanotubes

A nitrite sensor based on Dawson vanodotungstophosphates α₂-K₇P₂VW₁₇O₆₂·18H₂O (P₂W₁₇V) and carbon nanotubes (CNTs) was prepared by electrostatic layer-by-layer self-assembly technique. The sensor {PEI/PSS/[PDDA/P₂W₁₇V-CNTs]_n} was characterized by UV–vis spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray photoelectron spectra (XPS). The electron transfer and sensing ability of this sensor were explored using cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) technology. The results show that the incorporation of CNTs and P₂W₁₇V into the composite film endowed the modified electrode with fast transfer rate and high electrocatalytic activity towards oxidation of nitrite. This nitrite sensor with 10 bilayers has a broad linear range of 5 × 10⁻⁸ to 2.13 × 10⁻³ M, a low detection limit of 0.0367 μM (S N⁻¹ = 3), a high sensitivity of 0.35 mA mM⁻¹ NO₂⁻, an excellent anti-interference property in the presence of other potential interfering species and a good stable. It was successfully employed for determination of nitrite in real towards.     

新型π-扩展TTF衍生物的合成、晶体结构及量子化学计算

以对苯二胺为起始原料合成了2个新型的π-扩展四硫富瓦烯(TTF)衍生物,即N,N’-2(4,5-二苄硫基-1,3-二硫杂环戊烯-2-叶立德)-苯-1,4-二胺(5a)和N,N’-2(4,5-二甲酯基-1,3-二硫杂环戊烯-2-叶立德)-苯-1,4-二胺(5b),并利用氢核磁共振(1H NMR)、质谱(MS)、傅里叶变换红外光谱(FTIR)和单晶X射线衍射(XRD)等方法对化合物结构进行了表征.晶体结构分析结果表明,化合物5a和5b分属三斜晶系、P1空间群和单斜晶系、P21/n空间群.化合物5a和5b均为非平面结构分子,分子中对苯二亚胺平面和1,3-二硫杂环平面形成的二面角分别为87.61°(5a)和43.77°(5b).运用Gaussian 09程序,采用密度泛函理论(DFT)方法在B3LYP/6-31+G(d,p)水平上进行了量子化学计算,对化合物的前线分子轨道、静电势和电子吸收光谱进行了讨论,计算结果与实验值基本一致.     

Nonlinear current-voltage characteristics of conductive polyethylene composites with carbon black filled pet microfibrils

Current-voltage electrical behavior of in situ microfibrillar carbon black (CB)/poly(ethylene terephthalate) (PET)/polyethylene (PE) (m-CB/PET/PE) composites with various CB concentrations at ambient temperatures was studied under a direct-current electric field. The current-voltage (I-V) curves exhibited nonlinearity beyond a critical value of voltage. The dynamic random resistor network (DRRN) model was adopted to semi-qualitatively explain the nonlinear conduction behavior of m-CB/PET/PE composites. Macroscopic nonlinearity originated from the interfacial interactions between CB/PET micro fibrils and additional conduction channels. Combined with the special conductive networks, an illustration was proposed to interpret the nonlinear I-V characteristics by a field emission or tunneling mechanism between CB particles in the CB/PET microfibers intersections.     

Influence of clay on the morphology and phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends

The effect of clay on the morphology and phase-separation behavior of poly(methyl methacrylate)/poly(styreneco-acrylonitrile)(PMMA/SAN) blends and the variation of clay dispersion have been investigated. With the evolution of phase separation in PMMA/SAN, most of the clays are first located at the boundaries between PMMA and SAN, and then gradually move to the PMMA-rich domain, owing to the affinity of clay to PMMA. The introduction of clay causes the increase of binodal and spinodal temperatures of PMMA/SAN and enlarges their metastable region, indicating the phase stabilizing effect of clay on the matrix. But the influence of clay on the cloud points obviously depends on the composition of PMMA/SAN. The selective adsorption of PMMA on the clay results in the difference between the composition of surface layer and that of polymer matrix. Hence, the clay plays the role of an agent changing the conditions of phase structure formation.     

Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

荧光增白剂28的光漂白特性研究

荧光增白剂28(F-28)为欧盟标准EN 648-2006《与食品接触的纸和纸板-荧光增白剂牢度的测定》中判断食品接触材料所含荧光增白剂是否向食品中迁移的标样。我们发现,在规定的波长365nm紫外光激发下,F-28所制成的标样会出现光漂白现象。因此,本文对F-28的光漂白特性进行研究。结果表明,紫外辐照时间为60s时,四级(3mg/L)、三级(8mg/L)、二级(31mg/L)、一级(125mg/L)滤纸和玻纤的最大荧光值衰减率分别为0.16%、0.29%、0.92%、0.44%和2.59%、1.99%、0.49%、3.14%;当辐照时间延长到1800 s时,最大荧光值衰减率分别增加为4.67%、4.22%、5.51%、2.75%和35.37%、39.78%、28.09%、39.38%。因此,在对食品接触材料是否含有荧光增白剂以及是否迁移的测试中,必须考虑光漂白因素。同时,滤纸作为迁移实验载体,在降低光漂白和稳定性方面比玻纤更具优势。